Servotronix ServoStudio stepIM Reference Manual page 44

Preferences
Runtime Options
Auto Save options
IntelliSense options
Font options
Detail Level Log File
ServoStudio Version
Figure 15-2. ServoStudio – Preferences Screen – Advanced Settings
Configuration Files
Advanced Operation Mode
Refresh Rate of Data from
Drive
Project File
CANopen
Device
EDS File
44
For Expert users. Selected elements will be automatically
saved and restored the next time ServoStudio is opened,
even if they were not explicitly saved before closing
ServoStudio.
Applicable to systems with supported Terminal and
Script functionality.
Applicable to systems with supported Terminal and
Script functionality.
Determines the type and amount of information to be
included in log files.
The version of the ServoStudio software.
The names and locations of files used by
ServoStudio. For Expert users only.
Sets the rate at which variable values are
refreshed on screen. This includes both user-
defined watched variables and system-defined
variables which may trigger warnings or faults.
Defined in milliseconds.
A project file contains all settings currently
defined in ServoStudio, and any autosaved
data.
Kvaser Leaf interface. A USB interface for
connecting a computer to a CAN bus network.
The EDS file for the stepIM.
ServoStudio Reference Manual
stepIM