Husqvarna T536 Li XP Workshop Manual page 50

Troubleshooting Appendix
12 Troubleshooting Appendix
1. Power connectors
Make sure connectors are free from dirt and that
metal surfaces are not damaged. Pay certain at-
tention to the connection tabs. Power connectors
have the same basic design on product, battery
and charger. Only colors may vary.
2. Keypad connector
Make sure the two connector parts are fully at-
tached. Look for broken or loose cables.
3. Trigger switch signal connector
Make sure the white female connector is fully
attached to the trigger switch. Look for broken or
loose cables. Also look for signs of water, corrosion
or shortcirquit on connector and pins when disas-
sembled.
50 –
English
S/N – 2015100001
Pic 1
Pic 2
Pic 3