Husqvarna T542i XP Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Chainsaw
  5. T542i XP
  6. Operator's manual
Husqvarna T542i XP Operator's Manual

Husqvarna T542i XP Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
®
T542i XP
, T542i XP
G
EN
Operator's manual
2-32

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna T542i XP

Summary of Contents for Husqvarna T542i XP

  • Page 1 ® ® T542i XP , T542i XP Operator's manual 2-32...

  • Page 2: Table Of Contents

    Note: National regulations can set limit to the dealer for more information. operation of the product. Product overview T542i XPG T542i XP 25 24 23 1. Front handguard and chain brake 3. Start/stop button 2. User interface 4. SavE button...
  • Page 3 5. Battery indicator 6. Oil level indicator 7. Indicator for heat in the handles This product conforms to the applicable UK regulations. 8. Warning indicator 9. Information and warning decal Noise emission to the environment label 10. Top handle as per EU (also including New South 11.

  • Page 4: Safety

    direction of the operator. Risk of serious Environmental mark. The product or injury or death. package of the product is not domestic waste. Recycle it at an approved disposal Symbols on the battery and/or on the location for electrical and electronic battery charger equipment.
  • Page 5 Work area safety to a rotating part of the power tool may result in personal injury. • Keep work area clean and well lit. Cluttered or dark • Do not overreach. Keep proper footing and balance areas invite accidents. at all times. This enables better control of the power •...
  • Page 6 Battery tool use and care exposed metal parts of the chain saw ”live” and could give the operator an electric shock. • Recharge only with the charger specified by the • Wear eye protection. Further protective equipment manufacturer. A charger that is suitable for one type for hearing, head, hands, legs and feet is of battery pack may create a risk of fire when used recommended.
  • Page 7 If you do not feel sure about how to operate this product, turn to a person with professional knowledge and experience. • Turn to your servicing dealer or Husqvarna if you have questions about the operation of the 2120 - 004 - 08.09.2023...
  • Page 8 • Make sure that there is no risk that persons or • The vibration level increases if you cut with animals touch or influence on your control of the cutting equipment that is incorrect or not correctly product. sharpened. Cutting hardwoods, such as broadleaf trees, causes more vibration than cutting softwoods, such as conifers.
  • Page 9 If the safety devices are damaged or do not operate correctly, speak to your Husqvarna servicing dealer. Functions of the user interface (T542i XP) The user interface includes the start/stop button, SavE button, battery indicator, oil level indicator and the For more information about the user interface, refer to warning indicator.
  • Page 10 Chain brake and front hand guard Your product has a chain brake that stops the saw chain if you get a kickback. The chain brake decreases the risk of accidents but only you can prevent them. WARNING: Do not engage in situations where there is a risk of kickback.
  • Page 11 Safety instructions for maintenance The front hand guard also decreases the risk to touch the saw chain if your hand lets go of the front handle. WARNING: Read the warning instructions that follow before you do maintenance on the product. •...

  • Page 12: Assembly

    setting. Too large depth gauge setting increases the • Do maintenance on the cutting equipment regularly risk of kickback. and keep it correctly lubricated. If the saw chain is not correctly lubricated, the risk of wear on the guide bar, saw chain and chain drive sprocket increases. •...
  • Page 13 4. Steer the guide bar to its most rear position. Lift the 3. Push the air intake cover to the left until the holes saw chain above the drive sprocket and engage it in align. the groove on the guide bar. Start on the top edge of the guide bar.

  • Page 14: Operation

    9. Make sure that the saw chain stops when you safety chapter before you use the product. release the power trigger. Husqvarna Connect Husqvarna Connect is a free app for your mobile device. The Husqvarna Connect app gives extended functions for your Husqvarna product. •...
  • Page 15 • Fill the chain oil tank with chain oil. WARNING: No saw chain fully • Attach the cap carefully. prevents kickback. Always obey the instructions. Common questions about kickback • Will the hand always engage the chain brake during a kickback? No.
  • Page 16 3. Put the battery in the battery holder. 2. Push the SavE button again to disconnect the function. The green LED goes off. To engage and disengage the heat in the handles (T542i XPG) The product has heated handles. CAUTION: •...
  • Page 17 2. Push the battery release buttons and remove the battery from the battery holder to prevent accidental start. WARNING: Be careful when you cut on the push stroke. If the saw chain gets trapped in the trunk, the product General information about working can be pushed at you.
  • Page 18 4. Make sure that there is a carabiner on the other end of the safety strop. CAUTION: The safety strop must only be attached to the rope eyelet. 3. Make sure that you are in a stable and safe position to make the cut.

  • Page 19: Maintenance

    To remove a trapped product • Do a check of the harness, belt and ropes at a regular interval. 1. Stop the product. • If you must climb with the product, attach the product to the rear connection point on the harness. The 2.
  • Page 20 Maintenance Before Weekly Monthly Do a check of the saw chain. Look for cracks and make sure that the saw chain is not rigid or unusually worn. Replace if necessary. Sharpen the saw chain. Do a check of its tension and condition. Do a check for wear on the drive sprocket and replace is necessary.
  • Page 21 2. Make sure that the chain catcher is stable and attached to the body of the product. WARNING: Do not let go of the front handle! To do a check of the power trigger lockout 1. Make sure that the power trigger and power trigger lockout move freely and that the return spring operates correctly.
  • Page 22 A saw chain that does not move can also cause injuries. Replace a worn or damaged guide bar or saw chain with the guide bar and saw chain combination recommended by Husqvarna. This is necessary to keep the safety 2120 - 004 - 08.09.2023...
  • Page 23 It is not easy to sharpen a saw chain correctly without you must apply more pressure to push the guide bar the correct equipment. Use a Husqvarna recommended through the wood. If the saw chain is very blunt, there file gauge. This will help you to keep maximum cutting will be no wood chips but sawdust.
  • Page 24 Decrease the pressure on the pull stroke. 1. Use a flat file and a depth gauge tool to adjust the depth gauge setting. Only use a Husqvarna recommended depth gauge tool to get the correct depth gauge setting and bevel for the depth gauge.
  • Page 25 4. Tighten the bar nut with the combination wrench and a) Do a check of the oil channel in the guide bar lift the front of the guide bar at the same time. to make sure that it is not blocked. Clean if necessary.
  • Page 26 To do a check of the guide bar 3. Put the product on a stable surface with the clutch drum up. 1. Make sure that the oil channel is not blocked. Clean 4. Lubricate the needle bearing with a grease gun. Use if it is necessary.

  • Page 27: Troubleshooting

    7. Turn the guide bar daily to extend its life cycle. • Turn the adjustment screw for the oil pump. Use a screwdriver or the combination wrench. To adjust the chain oil flow WARNING: a) Turn the adjustment screw counterclockwise to Stop the motor before you increase the oil flow.

  • Page 28: Technical Data

    • Use the transportation guard on the product to prevent injuries or damage on the product during transportation and storage. Technical data Technical data T542i XP T542i XPG Motor Type BLDC (brushless) 36V BLDC (brushless) 36V Features...

  • Page 29: Accessories

    Guide bar and saw chain combinations The following cutting attachments are approved for Husqvarna T542i XP, T542i XPG. Equivalent sound pressure level, according to ISO 22868:2011, is calculated as the time-weighted energy total for different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound pressure level is a standard deviation of 1 dB (A).
  • Page 30 The part numbers are given in the table below. Using Husqvarna file gauge will give you the correct If you do not know which saw chain you have on your filing angles. We recommend you to always use a product, turn to your servicing dealer.

  • Page 31: Declaration Of Conformity

    Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Cordless battery chainsaw Brand Husqvarna Type / Model T542i XP, T542i XPG Identification Serial numbers dating from 2020 and onwards...

  • Page 32: Registered Trademarks

    UK Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Cordless battery chainsaw Brand Husqvarna Type / Model T542i XP, T542i XPG Identification Serial numbers dating from 2021 and onwards...
  • Page 33 2120 - 004 - 08.09.2023...
  • Page 34 2120 - 004 - 08.09.2023...
  • Page 35 2120 - 004 - 08.09.2023...
  • Page 36 Original instructions 1143510-26 2023-09-13...

This manual is also suitable for:

T542i xp g

Table of Contents