Table of Contents
Advertisement
Chapter 2
Installing and Configuring Hardware and Software
Mounting the FP-1300 on a DIN Rail
FP-1300 User Manual
The FP-1300 network module has a simple rail clip for reliable mounting
on a standard 35 mm DIN rail. Complete the following steps if you choose
to mount the module on a DIN rail.
1.
Write down the serial number from the back of the FP-1300 before you
mount it.
2.
Use a flathead screwdriver to open the DIN rail clip to the unlocked
position.
1
1 Rail Clip Locked
3.
Hook the lip on the rear of the FP-1300 onto the top of a 35 mm
DIN rail and press the module down onto the DIN rail.
Figure 2-2. Mounting the FP-1300 on a DIN Rail
2 Rail Clip Unlocked
Figure 2-1. Unlocking the Rail Clip
2-4
2
ni.com
Advertisement
Table of Contents
