Table Of Contents - National Instruments FieldPoint FP-1300 User Manual

Contents
Chapter 1
Overview of the FP-1300 Network Module
FP-1300 Hardware Overview ........................................................................................1-1
FP-1300 Software Overview .........................................................................................1-2
FP-1300 Setup Overview...............................................................................................1-3
Chapter 2
Installing and Configuring Hardware and Software
What You Need to Get Started ......................................................................................2-1
FieldPoint Safety Information .......................................................................................2-1
Mounting the FP-1300 and Terminal Bases ..................................................................2-3
Mounting the FP-1300 on a DIN Rail .............................................................2-4
Mounting the FP-1300 to a Panel....................................................................2-6
Mounting I/O Modules onto Terminal Bases ................................................................2-9
Using DIP Switches to Configure the FP-1300 .............................................................2-10
Configuring the Operating Mode ....................................................................2-11
Configuring the Arbitration ID Type (STD/XTD)..........................................2-12
Configuring the Base Arbitration ID...............................................................2-12
FP-1300 CAN Message Arbitration IDs .........................................................2-14
Connecting the FP-1300 to the CAN Network ..............................................................2-16
Connecting the CAN Cable to the FP-1300 ....................................................2-16
Terminating the CAN Network .......................................................................2-18
Powering the FieldPoint System....................................................................................2-18
Calculating Power for a FieldPoint Bank........................................................2-18
Connecting Power to the FieldPoint System ...................................................2-19
Connecting to Field Devices..........................................................................................2-20
Powering On the FP-1300..............................................................................................2-20
Installing the FP-1300 Software ....................................................................................2-21
Configuring the FP-1300 Software................................................................................2-21
© National Instruments Corporation
Connecting Terminal Bases with DIN Rail Mounting......................2-5
Removing the FP-1300 and Terminal Bases from the DIN Rail ......2-6
Connecting Terminal Bases with Panel Mounting ...........................2-8
Removing the FP-1300 and Terminal Bases from the Panel ............2-9
Configuring the Base Arbitration ID of an FP-1300
in Standard Mode ...........................................................................2-13
Configuring the Base Arbitration ID of an FP-1300
in Extended Mode ..........................................................................2-13
vii FP-1300 User Manual