National Instruments FieldPoint FP-1300 User Manual page 19

© National Instruments Corporation
3. Snap the panel-mount accessory onto the module.
Figure 2-6. Installing the Panel Mount Accessory
4. Lock the panel-mount accessory into place by pushing the rail clip to
the locked position.
5. Mount the FP-1300 to the panel with the panel-mount accessory. The
installation guide that came with the panel-mount accessory includes a
template that you can use to drill pilot holes for mounting.
Figure 2-7. Attaching the FP-1300 to the Panel
Chapter 2 Installing and Configuring Hardware and Software
2-7 FP-1300 User Manual