Mounting The Umi-7774/72 On A Din Rail - National Instruments UMI-7664 User Manual And Specifications

Note The external dimensions for the UMI-7772 are the same as the dimensions for the UMI-7774,
shown in Figure 4 and Figure 5.

Mounting the UMI-7774/72 on a DIN Rail

The UMI-7774/72 has one clip for mounting on a standard 35 mm DIN rail. You can order the DIN rail
mounting kit (part number 778710-01) from National Instruments. Complete the following steps
to mount the UMI-7774/72 on a DIN rail.
Caution To prevent damage to the UMI-7774/72, do not use screws longer than 0.25 in. to fasten the
DIN rail clip to the UMI-7774/72.
1. Fasten the DIN rail clip to the UMI-7774/72 using a number 2 Phillips screwdriver and the two
8-32  0.25 in. countersink screws shipped with the DIN rail clip as shown in Figure 6. These
screws have a nylon coating to prevent them from loosening.
NI UMI-7774/72 User Guide and Specifications
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
FAULT FWD HOME REV FAULT FWD HOME REV FAULT
FAULT ENABLE LIMIT LED FAULT ENABLE LIMIT LED FAULT
10.200 in.
(259.08 mm)
Figure 4. UMI-7774, Front View with Dimensions
10.200 in.
(259.08 mm)
Figure 5. UMI-7774, Side View with Dimensions
10
FWD HOME REV FAULT FWD HOME REV
ENABLE LIMIT LED FAULT ENABLE LIMIT LED
5.000 in.
(126.93 mm)
0.867 in.
(22.01 mm)
ni.com