National Instruments FieldPoint FP-1300 User Manual page 38

Appendix B Troubleshooting
FP-1300 User Manual
Can I hotswap an I/O module with a different I/O module while my
FP-1300 is running?
When you are using the FP-1300, you can hotswap an I/O module only with
the same model I/O module. If you need to swap an I/O module with a
different model I/O module, you must reset the FP-1300 and reconfigure
the I/O module using the FP-1300 Configuration Utility.
B-2 ni.com