National Instruments FieldPoint FP-1300 User Manual page 39

Specifications
Installation
Network
© National Instruments Corporation
Terminal wiring.........................................16–26 AWG copper conductor
Torque for screw terminals .......................0.5–0.6 N
Network interface......................................CAN
Compatibility ............................................ISO 11898
Communication rates ................................Up to 1 Mbps
Maximum cabling distance at 1 Mbps ......Refer to ISO 11898-2
CAN bus power supply range ...................10–30 VDC
CAN bus power consumption
Typical ...............................................0.72 W (30 mA at 24 VDC)
Maximum...........................................3 W
CAN bus isolation.....................................250 V
FieldPoint bank power supply range.........11–30 VDC
FieldPoint bank power consumption
Power = 1 W + 1.1 × Σ(I/O Module Consumption)
Maximum I/O terminal bases per bank.....9
Maximum number of banks ......................Determined by network
Weight .......................................................254 g (8.96 oz)
wire with 7 mm (0.275 in.) strip
length
2,500 V
topology
C-1
C
⋅
m (4.4–5.3 lb-in.)
operational,
rms
breakdown
rms
FP-1300 User Manual