Instructions for safe operation Failure to observe the information in this manual may result in personal injury or damage to equipment. To reduce the risk of injury of persons - use this door set only as a pedestrian door. Do not use the equipment if repair or adjustment is necessary.
Congratulations on your new automatic door! ASSA ABLOY Entrance Systems AB has developed automatic doors for more than 50 years. State-of- the-art technology and carefully tested materials and components provide you with a superior product. As with all other technical products, your automatic door requires periodic maintenance and service.
ASSA ABLOY Entrance Systems-authorized resellers shall extend this warranty to end-users only, but have no authority to extend a greater or different warranty on behalf of ASSA ABLOY Entrance Systems. A service agreement with ASSA ABLOY Entrance Systems will help secure the availability of a fully operational system and will give priority at call-out, thus minimizing the time that the equipment is unusable.
Intended use The ASSA ABLOY RD150-3 and ASSA ABLOY RD150-4 are automatic revolving doors developed to provide draught free access to buildings. The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The system is self-adjusting to the effects caused by normal variations in the weather conditions and to minor friction changes caused by e.g.
Main parts Description Dust protection roof (max. load 0 kg) Do not walk or store any material on the roof! Control unit CDC100 (behind fascia sheets) Lighting LED with control (option) ON/OFF switch Emergency stop button Horizontal pressure sensitive safety edges on the door leaves (option) Vertical pressure sensitive safety edges on the door leaves (option) Activation units Vertical presence photocell sensor PDR (option)
ON/OFF switch Start up Check that the door emergency stop button is released. If not, release the emergency stop button by rotating it in the direction of the arrows and press the reset button. Turn the ON/OFF switch to ON. Auto start: The door stands still.
Safety Safety device on the door The safety systems are monitored to ensure the high safety level of the door. The condition of the safety equipment is periodically tested. This monitoring is made during normal running conditions and it does not affect the normal day-to-day operations of the door. Standard Description Pressure sensitive safety edges placed on the drum edges, see page 11.
Pressure sensitive safety edges Pressure sensitive safety edges on the drum edges. These stop the rotation if compressed. When the obstacle is removed, the rotation continues. Force sensitive door leaves The door makes three attempts to start with two seconds pause between each attempt. If the obstacle is cleared and the door pushed forward more than ½...
Emergency stop button The door rotation can be stopped by pressing the emergency stop button. To reset the door to normal operation - release the emergency stop button by rotating it in the direction of the arrows and press reset button. Issue 2020-10-09 1014896-en-7.0...
Note! If the door is placed in an escape route, tests must be performed regularly by trained personnel or fire department, according to local laws. Contact your ASSA ABLOY Entrance Systems service representative. For contact information, see last page. 1014896-en-7.0...
Page 14
CLEANING The best way to remove dust and dirt from the ASSA ABLOY RD150-3 and ASSA ABLOY RD150-4 and to maintain the quality of the enamel layer, the surfaces should be cleaned three times/year (once/four months period) with gentle (pH 5-9), non-polishing detergent and water. Use a soft non-abrasive sponge.
Page 15
ASSA ABLOY Entrance Systems door sticker: Mandatory, if applicable to highlight the presence of the glass (applied to all glass sections that are moving). Automatic door Contact your ASSA ABLOY Entrance Systems service representative. For contact information, see last page. 1014896-en-7.0 Issue 2020-10-09...
Check that nothing is jammed beneath the door. Check whether the emergency stop button is released. Check that there are no objects in the safety detection zone. If the problem continues, please contact your ASSA ABLOY Entrance Systems representative. Issue 2020-10-09 1014896-en-7.0...
(PRA-0003) available. These are used together. The table below shows the recommended interval in revolutions, when to replace parts during preventive maintenance. Talk to your ASSA ABLOY Entrance Systems representative to learn more about our service offering. Minimum maintenance interval of once a year. See EN16005.
Options Even though the ASSA ABLOY RD150-3 and ASSA ABLOY RD150-4 are installed to comply with all applicable safety regulations, it is possible to enhance safety/comfort with the following add-ons (please contact your local ASSA ABLOY Entrance Systems company for detailed description).
Infrared presence sensing system Installed on the top of the door leaves-provides safety over the whole height of the door. If the sensor detects an obstacle the door stops or reduces speed to 0.5 rpm (configurable). When the obstacle is removed, the rotation starts. Laser presence sensing system Installed on the top of the door leaves-provides safety over the whole height of the door.
Pressure sensitive safety edges If one of the safety edges, mounted on the door leaves, is compressed, the door stops. When the obstacle is removed, the rotation starts. Mechanical lock Lock the door leaf: Turn the ON/OFF switch to OFF. Use the key to lock the door leaf.
Vertical presence photocell sensor PDR Vertical presence photocell sensor PDR located above the entrance on inner and outer sides. If the beam is broken in the safety zone (approx. 25° from the drum edge) the door stops. When the obstacle is removed the rotation starts. Accessories Direction sensing radar DSR The radar DSR is direction sensing i.e.
Page 22
Other products from ASSA ABLOY Entrance Systems Door Systems Vertical lifting fabric doors Balance doors Dock levelers Air curtains Dock shelters Sliding doors Folding doors Swing doors High speed doors Automatic and manual activation units Loadhouses Overhead sectional doors Service such as preventive maintenance and upgrade programs, emergency repairs, service...
Page 23
IEC 60335-1 ed. 5:2010 IEC 60335-2-103 ed. 2.1:2011 EN 1627:2011 Class RC3 Certificate issued by a notified or competent body (for full address, please contact ASSA ABLOY Entrance Systems AB) concerning the equipment: BY/112 02.01 020 07601 B 058029 0035 SC0834-14 The manufacturing process ensures the compliance of the equipment with the technical file.
Page 24
Building on the long-term success of the Besam, Crawford, Albany and Megadoor brands, we offer our solutions under the ASSA ABLOY brand. Our products and services are dedicated to satisfying end-user needs for safe, secure, convenient and sustainable operations.