Model 91DCP Overhead Concealed Closer
Non-Hold Open and Hold Open
Metal Frame Installation Instructions
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
Model 91DCP (Left Hand shown)
4-1/2" x 4-1/2" Butt or 3/4" Offset Pivot Hung; consult factory if other means
Components
Arm
LH: 90236-DCP (finish)
RH: 90237-DCP (finish)
Closer Body
91DCP LAP x (Specify
hand and function)
Tools Needed
Copyright © 2016, 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
IS91DCP 05/20
Pour la version francaise voir www.nortondoorcontrols.com.
READ AND FOLLOW ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Optional Hold Open
Assembly (90254)
Cover Plate
LH: 90272-(finish)
RH: 90275-(finish)
Track
(90239)
Retrofit Track Spacer and Screws,
Optional (90260)
Not for new installation. Replacement only.
Consult factory.
Supplied Fasteners
Non Hold Open Stop
Slider
Block (90255)
(90253)
Arm
Closer
Screw Pack
Screw Pack
(90283-finish)
(90241-finish)
Cover Plate
Screw Pack
(90278-finish)
Track
Screw Pack
(90242)