Assa Abloy Rixson Smok-Chek VI Installation And Instruction Manual

RIXSON
ASSA ABLOY
Pull Side Applications with Slide Track
(4 Pull, 6 Pull)
(see page 7 for template)
Push Side Applications with Double Lever Arms
(4 Push, 6 Push)
(see page 2 for template)
Item No. Description
1 Track (Pull Side)
2 Cover
3 Track Arm (Pull Side)
4 Double Lever Arm (Push Side)
Tools required:
• Allen wrench set (inch)
• Flat blade screwdriver (potentiometer &
terminal size)
• Screwdriver (Phillips size 2)
Use screw pack and hardware provided to mount operator.
Requirements:
 Units are handed. Hand of unit and hand of door must be the same.
 All dimensions shown in inches (mm).
 Door must be hung on ball bearing butt hinges or 3/4" (19) offset pivots.
 Door thickness must be 1-3/4" (44) to 2-1/4" (64).
 Door must swing freely through the entire opening and closing cycle before beginning the installation procedure.
 Frame face must be a minimum of 2" (51).
 Ceiling clearance must be a minimum of 3 -1/2" (89) for push side application or 4" (102) for pull side application. See pages
2 and 7 for templates.
 Power input to unit must be of the same voltage as that stated on the unit.
 Unit to be mounted on interior of building in dry environment, maximum humidity of 95%.
 See NFPA70 for wiring requirements and NFPA72 for alarm system requirements.
Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
®
• Tape ruler
• Power drill
• Center punch
• Wire stripper
Installation and Instruction Manual
3
1
Smok-Chek® VI
RIXSON
ASSA ABLOY
1
4

Table of Contents:

Push Side Template....................2
Push Side Installation..............2-4
Closer Adjustments.....................5
Hold Open Position Adj...............6
Pull Side Template......................7
Pull Side Installation.................7-9
Closer Adjustments...................10
Hold Open Position Adj.............11
Non-Detectored Electrical.........12
Detectored Electrical.................13
RF Unit Electrical.................14-15
Troubleshooting.........................15
General Information..................16
80-9372-0100-015 (02-14)
®
2