8.2 Connecting the GM1 Controller and PC
8.2.1 Selecting a Connection Port for GM Programmer
Select either LAN port connection or USB port connection.
8.2.2 Connecting the GM1 Controller and PC with a Cable
Use an Ethernet cable or USB cable to connect the GM1 Controller and a PC on which the GM
Programmer is installed.
8.2.3 Operation when Power is ON
When turning ON the power supply to the system incorporating the GM1 Controller, consider
the nature and statuses of any external devices connected to the system, and take sufficient
care so that turning ON the power supply will not initiate unexpected movements.
1.
Turn ON the power supplies to the I/O devices connected to the GM1 Controller.
2.
Turn ON the power supply to the servo amplifier.
3.
Turn ON the power supply to the GM1 Controller.
WUME-GM1RTXOP-01
8.2 Connecting the GM1 Controller and PC
8-3