7.5 Programming in Instruction List (IL)
● To create IL programs, the "Enable IL" check box in the Options dialog box must be selected.
Refer to
"7.5.2 Settings in IL
● To delete a row, select the row and press the <Ctrl > key + <Delete> key simultaneously.
● Networks (circuits) can be commented out. The procedure for commenting out a network
(circuit) is the same as for LD programs.
Refer to
"7.1.6 Commenting out a Network
● The IL program can be converted and displayed as an LD or FBD program.
From the menu bar, select FBD/LD/IL>View and select a post-conversion programming
language.
7.5.2 Settings in IL Program
For IL programs, the following settings can be configured.
Open the Options window (by selecting Tools>Options), select the "FBD, LD and IL editors"
category and specify settings in the "IL" tab window.
Type
Item
View
Enable IL
7-36
Program".
(Circuit)".
Description
Enables the use of IL programming language.
If this check box is cleared, IL will not be displayed in the list of
programming languages for setting objects when a new project is
created.
WUME-GM1RTXOP-01