7.8 Build
When a created program is subject to a build process, objects in the application are compiled. If
code generation is executed after the build process is executed, an application to be
downloaded to the GM1 controller will be generated.
7.8.1 Build
The syntax of all objects is verified when the build process is executed for the first time.
The syntax of only differences is verified when the build process is executed a second time and
thereafter. No application code will be generated.
7.8.2 Rebuild
Verifies the syntax of all objects again.
As is the case with build, no application code will be generated.
1.
From the menu bar, select Build>Rebuild.
The syntax of all objects will be verified. If an error or warning occurs, an error or warning
message will be displayed in the message view.
Check the message displayed in the message view and correct the program as necessary.
After correcting the program, execute rebuild again.
7.8.3 Code Generation
The GM1 controller generates codes (application codes) to be executed when the application
starts.
1.
From the menu bar, select Build>Code Generation.
Tests will be executed to check memory allocations, data types, and library availability and
code size (in bytes), data size (in bytes), allocated memory contents, and most frequently
used address (in bytes) will be displayed in the Messages view.
Example: Messages view displayed when code generation is completed correctly
WUME-GM1RTXOP-01
7.8 Build
7-59