Panasonic GM1 User Manual page 573

(1)
(2)
● For tag connection, uppercase English letters cannot be used for tag names.
4.
In the "Assemblies" tab, set up a data configuration.
If "T→O size" in the "General parameters" section is set to 16 bytes, the default data
configuration will be as shown below.
WUME-GM1RTXOP-01
This section displays the connection points that are supported by the adapter device
according to the EDS file.
Select a connection point to be used.
Example: Select "Input Only (ID type)".
The parameters in the "General parameters" section differ according to the selected
connection point.
Example: Set "RPI" to 10 (ms) and "T→O size" to 16 (bytes).
13.4 EtherNet/IP
13-47