Adding Expansion Units - Panasonic GM1 User Manual

● You can copy the parameter set in a channel. To do so, select a channel (CH0 or CH1) in the
"Category Selection" column and click the [Copy] button. Next, select another channel and click
the [Paste] button.

5.4.2 Adding Expansion Units

This section explains how to add device objects for expansion units to a project and set them
up.
For example, use the following procedure to add a digital input unit (product number:
AGM1X64D2) to Empty1.
1.
Right-click the [Empty1] object in the navigator pane and then select "Unit Management"
from the context-sensitive menu that is displayed.
WUME-GM1RTXOP-01
5.4 Setting up Unit Control
5-15