Panasonic GM1 User Manual page 489

Channel
Ch*_ComparisonMat
ch15Status
■
OutputArea (output area)
Channel
Ch*_RequestRegist
er
Ch*_TemporaryPres
etValue
Ch*_TemporaryCurr
entValue
■
Ch*_RequestRegister (Ch* request register)
Channel
Ch*_OperationRead
yRequest
Ch*_CountEnableRe
quest
Ch*_ResetRequest
Ch*_PresetRequest
Ch*_ResetEnableRe
quest
Ch*_CurrentValueC
hangeRequest
Ch*_PresetValueCh
angeRequest
WUME-GM1RTXOP-01
Type Description
to Ch* comparison
match 15 flag
Type Description
WORD Ch* request register
Ch* temporary
DINT
preset value
Ch* temporary
DINT
current value
Type Description
Ch* operation ready
BOOL
request
Ch* count enable
BOOL
request
BOOL Ch* reset request
BOOL Ch* preset request
Ch* reset enable
BOOL
request
Ch* current value
BOOL
change request
Ch* preset value
BOOL
change request
12.6 High-speed Counter Function
Remarks
Remarks
-
Stores the value to replace the preset
value.
-2,147,483,648 to 2,147,483,647
Stores the value to replace the count value.
-2,147,483,648 to 2,147,483,647
Validity
Remarks
condition
Specifies whether to enable
operation preparation for the
Level
count function.
0: Disable, 1: Enable
Specifies whether to enable
count operation.
Level
0: Disable, 1: Enable
Specifies whether to reset the
count value.
ON edge
0: Do not reset
1: Reset
Specifies whether to change the
count value to a preset value.
ON edge
0: Do not change, 1: Change
Capture function:
Specifies whether to enable
reset count operation for the
input Z signal or comparison
match flag.
Level
0: Disable, 1: Enable
Sampling capture function
Specifies whether to enable
reset count operation.
0: Disable, 1: Enable
Specifies whether to change the
count value to a temporarily
ON edge
current value.
0: Do not change, 1: Change
Specifies whether to change the
preset value to a temporarily
ON edge
preset value.
0: Do not change, 1: Change
12-27