11.4 Synchronous Operation
11.4 Synchronous Operation
This section explains synchronous cam operation, synchronous gear operation, and
synchronous phase operation that use function blocks.
11.4.1 Synchronous Cam Operation
To perform synchronous cam operation, you must set up a cam table.
Synchronous cam operation: How to use cam
This section explains how to change graphs in a cam table after adding a cam table object.
1.
Right-click the [Application] object in the navigator pane and then select Add Object>Cam
table from the context-sensitive menu that is displayed.
The "Add Cam table" dialog box will be displayed.
11-40
WUME-GM1RTXOP-01