Quadratec QuadraTop Adventure Top S Manual page 9

FIG 43
Step 9: Installing the Top Deck and Front
Windshield Header Assembly
With the first bow installed to the vehicle and
the front windshield header folded back (FIG
43), locate the Quick Release knobs on the
ends of the over door bows and slip the knob
into the hole in the first bow mount (FIG 44) by
pulling the knob out and then releasing. Repeat
on the other side. This will secure the back of
the header assembly to the vehicle (FIG45).
FIG 46
FIG 50
FIG 45
FIG 47
FIG 48
Step 10: Installing the Top Deck
With the front header folded back towards the
rear of the vehicle and on top of the rear bow
(FIG 46), locate the rear spring straps that
have a buckle and D-Ring attached to it. The
end of this strap has a loop sewn into it.
Detach the "looped end" portion of the strap
from the buckle. This strap will wrap under
the rear seat belt post and back through the
loop (FIG's 47 & 48) and then from the inside
and around the roll bar back up towards the
rear bow leg (FIG4 9). As shown in FIG 50,
make sure the strap comes from the inside
of the vehicle out and up towards the front
of the vehicle and over the Rear bow leg.
Re-attach the strap end to the buckle/D-Ring
assembly.
9
FIG 44
FIG 49