Advertisement
Quick Links
Quadratec
QR3 & QR4
®
Tubular Side Step Bars
Installation Manual for '07- Current JK Wrangler Vehicles
#
12004.30XX &
#
12004.31XX - All Finishes
3" Side Tube Step
4" Oval Side Tube Step
4" Oval in Stainless
3" Round Detail
TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUC-
TIONS AND PROCEDURE NOTICES BEFORE ATTEMPTING TO
INSTALL OR USE THIS PRODUCT. FOLLOW ALL INSTRUCTIONS
AND WARNINGS WITH PRODUCT & VEHICLE OWNERS MANUAL.
THIS PRODUCT IS INTENDED TO REDUCE RISK OF OFF-ROAD
BODY PANEL DAMAGE AND ASSIST IN ENTRY/EXIT FROM
VEHICLE. YOUR TUBE STEP IS NOT INTENDED TO INCREASE
OCCUPANT PROTECTION OR REDUCE VEHICLE DAMAGE IN
EVENT OF ACCIDENT.
PROPERLY TORQUE AND RECHECK FASTENERS AND SECURITY
OF STEP TREAD AFTER 250 MILES AND FREQUENTLY THERE-
AFTER. INSPECT AND DO NOT USE TUBE STEP IF DAMAGED.
DO NOT USE TUBE STEP AS WINCH/SELF-RECOVERY
ATTACHMENT POINT.
CHECK STATE AND LOCAL HIGHWAY SAFETY LAWS REGARDING
PERMITTED ON-ROAD EQUIPMENT.
®
The Trusted Source
Advertisement
Related Manuals for Quadratec QR3
Summary of Contents for Quadratec QR3
- Page 1 Quadratec QR3 & QR4 ® Tubular Side Step Bars Installation Manual for ’07- Current JK Wrangler Vehicles 12004.30XX & 12004.31XX - All Finishes 3” Side Tube Step 4” Oval Side Tube Step 4” Oval in Stainless 3” Round Detail TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:...
-
Page 2: Required Tools
Careful attention is required to this instruction or operation but does ® generally not relate to personal injury. Damage to your Quadratec product or other property may result if you don’t follow instructions. Due to the length and bulk of these... -
Page 3: Parts List
Installation Hardware: Driver Passenger Side Side PARTS LIST: Flat Washers: Driver (Left) Side Tube Step QTY 1 K) 10mm ID x 34mm OD x 3mm: Passenger (Right) Side Tube Step QTY 1 QTY 6 (4dr) QTY 4 (2dr) L) 8mm x 24mm OD x 2mm: Mounting Brackets: (length) QTY 12 (4dr) QTY 8 (2dr) A) Driver (Left) Front: (medium) - Page 4 Pre-Install: Mounting Style Definition Figure 1 Figure 2 Differences in Mounting Styles Body Style “A” (Fig 1) Will use the Style “B” (Fig 2) will use the supplied supplied 10mm Nut Plates (inserted into 8mm x 35mm bolts (threaded into the body), 10mm bolts, lock washers &...
- Page 5 Step Two: Install Underside 10mm Bolts Figure 5 Figure 6 Installing Underside 10mm Bolts Under the body just under where you the hole in the Bracket. Bolt the Bracket mounted the bracket to the pinch welds to the Nut Plate with (1) 10mm x 35mm above, insert a nut plate into the open- Hex Bolt, (1) 10mm Lock Washer and (1) ing with the nut facing upwards (Fig 6).
- Page 6 Step One: Mounting Brackets Style B: Figure 10 Figure 11 Install Mounting Brackets Style B Put on safety glasses. Use these steps if the bracket as shown (Fig 10). Loosely your vehicle is equipped for Style B. install a (1) 8mm x 35mm bolt, (1) lock Select the appropriate mounting brack- washer and (1) 8mm x 28mm OD x 3mm ets per the desired location.
- Page 7 Step Three: Install Steps to Brackets (Either Style A or B) Figure 15 Figure 16 Install Steps to Mounting Brackets With the three mounting brackets in- If they do not, you have the wrong side stalled, locate the Drivers side tube step tube.
- Page 8 Product Care and Maintenance: Your Tube Steps have been designed To further protect your stainless tube and manufactured to provide years of steps we recommend using a non-abra- use. However, like any product, general sive car wax on the part on a regular maintenance is required to keep it basis.
- Page 9 All versions come with Forged Steel Clevis Hook and on all electrical components. Detailed installation a Hi-Viz Rubberized Custom “Quadratec Green” Remote with 12’ Cord Nylon Safety Strap instructions and a handy glove compartment sized Owners Manual with Winching Guide are included.
- Page 10 7. Belt Rail System: Each QuadraTop Shop today! @ utilizes the original belt rail attachment methods quadratec.com for a fit that’s as tight as a drum! ® The Trusted Source...
- Page 11 Q uadraTop ® Replacement Soft Tops Affordable quality and durability with no compromises! Our top kits are designed to work with factory hard- ware and feature finer quality materials and workmanship along with the latest in manufacturing technolo- gies for unprecedented value. Our new product team with decades of soft top knowledge and experience delivers you all the great features you want in a replacement top with unsurpassed customer service and sup- port.
- Page 12 Quadratec to obtain a RGA number only to Quadratec branded accessories first sold (610-701-3336). All labor, removal, shipping in the United States, Quadratec warrants to the and installation costs are customer’s initial retail purchaser only that your responsibility.