Quadratec QuadraTop Adventure Top S Manual page 2

Important Safety information
Your QuadraTop® soft top is intended to increase
the utility and enjoyment of your offroad capable
vehicle. Before installation, please take a mo-
ment to review the following safety information
a hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
You CAN be KILLED or SERIOUSLY HURT if you don't follow instructions.
a hazardous situation which, if not avoided, could result in minor or moderate
CAUTION
injury. You CAN be moderately HURT and also may suffer property damage if you
don't follow instructions.
Careful attention is required to this instruction or operation but does generally not
NOTICE
relate to personal injury. Damage to your Quadratec® product or other property
may result if you don't follow instructions.
Before you begin Installation:
Congratulations on your purchase of the
QuadraTop! This high quality soft top is desig-
ned to provide years of protection from whate-
ver nature can throw at you! We have used only
the finest materials in creating this soft top but
like any product that is exposed to the elements,
there is some general maintenance that is requi-
red to keep your QuadraTop looking like new.
Please see page 11 for these important main-
tenance tips.
Pre-installation & Initial Steps:
For a smooth fit and ease of installation, this top should be installed at temperatu-
res above 72 degrees. Below this temperature, the fabric may contract an inch or
more making it difficult to install. We highly recommend taking the top out of the
package and letting it sit inside a warm place or direct sunlight for 1-2 hours before
NOTICE
you install the top. When warm, this top will install quickly.
Please also note that it is normal for fabric to contract and wrinkle when stored in
the shipping carton. In a few days the fabric will relax and wrinkles will disappear.
Step 1: Door Surround Pre-assembly:
After completely removing your soft or hard top
from the vehicle, put on safety glasses.
Carefully remove all the contents of the large
shipping box onto a table top or onto the
ground on top of a soft towel. Once the
components are removed from the shipping box,
locate the tdriver and passenger door surrounds.
and installation instructions. Important safety in-
formation is generally preceded by one of three
signal words indicating the relative risk of injury.
The signal words mean:
Thank you again for your purchase and let's
start the installation process!
When unpacking, check to make sure all parts
are included. If any part is missing or broken,
please call Quadratec Customer Service at
800-745-6037 as soon as possible.
Important: Make sure you become familiar with
the installation process of this top by reading the
following instruction sheet thoroughly.
Carefully organize the door surrounds as
shown in FIG1 making sure the passenger
side and driver's side components are
separated.
2