Advertisement
Quick Links
QuadraTop
Replacement Soft Top
Replacement Soft Top for 2007-2018
2 Door Jeep
This Replacement Fabric kit is designed to fit on your Factory soft top installed
2 Dr Jeep® Wrangler when portions of your original soft top rear bow assembly
NOTICE
has been completely removed. Before beginning your installation of this
product, you will need to remove your existing soft top fabric and factory rear
bow.
Loss of vehicle control involves risk of death or serious injury, particularly to
parts of your body not restrained within vehicle. This product is intended for
weather protection only and should not be relied upon to contain occupants
in the event of an accident or to protect from either ground contact or falling
objects. To reduce risk of accident or injury:
•
ALWAYS WEAR SEATBELTS
WARNING
•
Always keep head, arms & body parts within vehicle.
•
Fully secure or stow the soft top before driving according to instructions.
Never try to latch or fold soft top while driving. Do not use if damaged or
worn.
•
Read and follow all instructions & warnings accompanying this product, in
your vehicle owner's manual and Off Road Driving Supplement.
RISK OF EYE INJURY. Safety glasses should be worn at all times while insta-
CAUTION
lling or maintaining this product.
PART LIST:
FABRIC TOP - QTY 1
QUARTER WINDOW, RIGHT - QTY 1
QUARTER WINDOW, LEFT - QTY 1
REAR WINDOW - QTY 1
Driver Side Over Door Bow - Qty 1
Passenger Side Over Door Bow - Qty 1
Center Bow Assembly - Qty 1
®
Adventure Top Fabric Only
Wrangler JK Item
®
REQUIRED TOOLS:
SAFETY GLASSES
MASKING TAPE
PHILLIPS SCREW DRIVER
PLIERS
LARGE TOWEL
The Trusted Source
Fabric
11113.0435
#
Advertisement
Related Manuals for Quadratec QuadraTop 11113.0435
Summary of Contents for Quadratec QuadraTop 11113.0435
- Page 1 QuadraTop Fabric ® Replacement Soft Top Adventure Top Fabric Only Replacement Soft Top for 2007-2018 Wrangler JK Item 11113.0435 2 Door Jeep ® This Replacement Fabric kit is designed to fit on your Factory soft top installed 2 Dr Jeep® Wrangler when portions of your original soft top rear bow assembly NOTICE has been completely removed.
- Page 2 CAUTION you don’t follow instructions. Careful attention is required to this instruction or operation but does genera- lly not relate to personal injury. Damage to your Quadratec® product or other NOTICE property may result if you don’t follow instructions. Before you begin Installation: We are excited that you have chosen the Adventure Top Fabric Replacement Top Kit.
- Page 3 Step 1: Remove Existing Soft Top Fabric screws (Depending on model year). See below for Put on safety glasses. After verifying that you Header fabric removal options (Step 1B). have the correct factory original bow system and Make sure you keep all screws and fasteners in a hardware, remove the existing soft top from the safe place after removal.
- Page 4 Preparation for Installation of Fabric Only Replacement Top: Step 1B: Remove Fabric From The Header fabric back into the header and tighten the screws After you have removed the corner screws called (see installing the front header later, in step 3). out in step 1A, there are two ways to remove and The second method takes more time as it entails replace the fabric on your vehicle’s soft top hea-...
- Page 5 Installation of Fabric Only Replacement Top: Step 3A: “Quick” Attach the Deck Fabric to the Windshield Header With the soft top underside (substrate) facing up header securing the fabric to the header (Fig 20) and top of the Windshield header also facing up, including the four corner screws (Fig 21).
- Page 6 Step 5: Complete Header Re-Assembly Close the upper header over the taped down fabric sandwiching the fabric but leaving the underside faced up on the hood (See FIG 29). Using the screws you removed in step one, reinstall the four corner screws and then the 19 or 27 (de- pending on model year) screws along the top of the header.
- Page 7 Step 7: Install Center Bow to the Vehicle Locate the center bow assembly. With a friend, place the bow assembly over the roll bar and line up the assembly to the original upper bow mount bracket (Fig 40) that were left on the vehicle. The center bow should be towards the rear of the vehi- cle as shown in Fig 39.
- Page 8 Locate the center bow webbing and the spring spring end to the webbing as shown in figs 50 and assembly that is attached to the top deck. Figs 48 & 49. Using pliers, crimp the spring end so it does not Attach the come loose.
- Page 9 IMPORTANT: The top deck MUST be centered on the rear of the vehicle for the NOTICE windows to fit properly. Step 10: Installing the Quarter and rear Windows to the top Deck To ensure the top is centered on the vehicle you will be installing the two quarter windows and the rear window to the top deck and to each other before securing it to the vehicle body.
- Page 10 Each Time you remove the windows: Completely pull the windows out of the “C” Chan- nel before pulling the windows down! Do not “Peel” the windows out. There may be times when the “P” extrusion may come out of the “C” Channel ends due to extreme downward pressure.
- Page 11 After sliding the retainer all the way through the Once the Tailgate bar in secure, lower zippers on “C” Channel, roll the tailgate bar into the mounts both sides of the rear curtain (FIG 78) and then with the outside of the fabric facing towards the secure the rear zipper cover flap as shown in Figs rear of the Vehi- cle (Figs 76 &...
- Page 12 Zippers: Keeping the zipper cleaned and “polished” out using the window polish listed lubricated with a silicone lubricant (see Page on page 15 (Available at Quadratec.com). 15) will help prevent damage and keep the Water/Fabric: In the event of seeping zippers in a smooth working condition.
- Page 13 Replacement Hardware & Soft Top Accessories available at Quadratec.com Please review this set of instructions, and > Complete Bow Assemblies: #11132.95XX examine your original equipment hardware. > Soft Top Emergency Repair Kit: #91083.4201 Is any hardware is missing or damaged? >...
- Page 14 Quadratec, Inc. 1028 der shall, upon Quadratec inspection and Saunders Lane, West Chester, PA 19380. at Quadratec’s option, be either repair or replacement of product or parts (new or This Limited Warranty is the only warranty refurbished) covered under this Limited made in connection with purchase.