Advertisement
Quick Links
Replacement Soft Top
Installation Manual for '07-'09 2 Door (JK) Wrangler
PARTS LIST:
FABRIC TOP - QTY 1
QUARTER WINDOW, RIGHT - QTY 1
QUARTER WINDOW, LEFT - QTY 1
REAR WINDOW - QTY 1
Loss of vehicle control involves risk of death or serious injury,
particularly to parts of your body not restrained within vehicle.
This product is intended for weather protection only and should
Not be relied upon to contain occupants in the event of an accident
or to protect from either ground contact or falling objects.
To reduce risk of accident or injury:
•
ALWAYS WEAR SEATBELTS
•
Always keep head, arms & body parts within vehicle.
•
Fully secure or stow the soft top before driving according
to instructions. Never try to latch or fold soft top while driving.
Do not use if damaged or worn.
•
Read and follow all instructions & warnings accompanying
this product, in your vehicle owner's manual and Off Road
Driving Supplement.
RISK OF EYE INJURY. Safety glasses should be worn at all times while
installing or maintaining this product.
The Trusted Source
Fabric
REQUIRED TOOLS:
SAFETY GLASSES
PHILLIPS SCREWDRIVER
MASKING TAPE
®
#
11000.2335
Advertisement
Related Manuals for Quadratec QuadraTop Premium 11000.2335
Summary of Contents for Quadratec QuadraTop Premium 11000.2335
- Page 1 Fabric Replacement Soft Top 11000.2335 Installation Manual for ’07-’09 2 Door (JK) Wrangler Loss of vehicle control involves risk of death or serious injury, particularly to parts of your body not restrained within vehicle. This product is intended for weather protection only and should Not be relied upon to contain occupants in the event of an accident or to protect from either ground contact or falling objects.
- Page 2 Careful attention is required to this instruction or operation but does ® generally not relate to personal injury. Damage to your Quadratec product or other property may result if you don’t follow instructions. Before You Begin Soft Top Installation:...
- Page 3 Step One: Soft Top Removal Remove Side Quarter Windows. Remove Rear Window. Remove Rear Tailgate Bar REMOVE THE SIDE QUARTER Figure A WINDOWS AND REAR WINDOW Remove the Quarter Windows and the Rear Window. Remove the metal Tail- gate Bar from the bottom of the Rear Window and set it aside.
- Page 4 Step Three: Soft Top Removal RELEASE REAR CORNERS Release the rear corners of the top. Pull gently down and then out to release the plastic strip from the retainer on the vehicle. See figure C. Figure C Step Four: Soft Top Removal Figure D RELEASE REAR BOW As shown in Figure D, use a phillips...
- Page 5 Step Seven: Soft Top Removal REMOVE TOP FABRIC Raise the bow assembly and lock the header to the windshield. Drape the top fabric, backing side up, over the hood and windshield. Remove the nineteen (19) screws that secure the fabric to the upper and lower headers.
- Page 6 Step One: Soft Top Installation INSTALL TOP FABRIC Figure G Raise the bow assembly and lock the header to the windshield. As seen in Backing Figure G, Drape the top fabric, backing side up side up, over the hood & windshield. Center Notch Figure H: Slide the extrusion along front edge of the top into the channel in the...
- Page 7 Step Four: Soft Top Installation ATTACH TOP TO REAR BOW View from inside vehicle Raise the header and bow slightly to allow you to attach the rear bow flaps, that are inside the top above the rear Rear window opening, to the rear bow. Use the four (4) screws that were removed in disassembly to secure flaps to bow.
- Page 8 Step Seven: Soft Top Installation Figure O ATTACH QUARTER WINDOW ZIPPERS Figure O: Start the zipper on the Quar- ter Window and close it to 1-2 inches. Step Eight: Soft Top Installation Figure P SECURE FRONT OF QUARTER PANELS See Figure P: Roll the plastic strip along the front of the Quarter Window into the channel in the Door Surround.
- Page 9 Step Twelve: Soft Top Installation Tailgate Bar INSTALL TAILGATE BAR ONTO REAR WINDOW Remove the Rear Window from the box Tailgate and lay it flat with the backing side up. Retaining Locate the Tailgate Bar set aside in Step Channel One.
- Page 10 Folding The Top Down: REMOVE QUARTER PANELS AND REAR WINDOW To remove the Quarter To remove the rear Quarter Windows, Windows, unzip the quarter window zippers. unzip the Release the plastic strip from the re- rear and top tainer. Release the Hook and Loop fas- zippers.
- Page 11 Quadratec.com hardware is missing or damaged. Quadratec offers a full assortment of Don’t see what you need here? Call us for Expert Advice at 800-745-5337 original equipment hardware and stor-...
- Page 12 If zipper opens behind the 11 (Available at Quadratec.com). slider, the slider may have been spread Water/Fabric: In the event of seeping apart. This problem can usually be fixed through the seams, 3M Scotchgard ®...
- Page 13 Great way to hang on during open air driving > Neoprene Wrapped w/Custom Quadratec logo > Attach easily with hook & loop fasteners > Choose Black or Red 3” Quadratec Neoprene Wrapped Deluxe Sport Handles 19.99 Sold in Pairs 14018.7X only ... Choose Black or Red Highrock 4x4...
- Page 14 Introducing: Bimini Top ® Clearview summer accessories Windstopper Tonno Cover Bimini, Bimini Plus, Windstopper & Tonno Cover > Durable 23oz fabric > Simple, no-drill installation > Heavy-duty straps & buckles > Fits over factory softtop hardware > Color-matched to all accessories For ’07-’09 JK Wrangler: 49.99 Bimini Top #11022.0435...
- Page 15 Quadratec Exclusive Parts and Accessories: Quadratec Sliding Armrest Console Organizer > Fully padded & upholstered > 10” x 8”x2” storage compartment > Console slides forward 4.5” for convenience > Steel brackets attach to top of factory console using existing fasteners >...
- Page 16 Quadratec neither consideration on QuadraTop Premium soft top assumes nor authorizes any vendor, retailer or should first contact Quadratec to obtain a RGA other person or entity to assume for it any other number (610-701-3336). All labor, removal, obligation or liability in connection with this shipping and installation costs are customer’s...