Advertisement
Quick Links
QuadraTop
®
Adventure
Top
®
Installation Manual: for 1997-2006 Wrangler (TJ) Vehicles
#
11113.00XX
TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS
AND PROCEDURE NOTI ES BEFORE ATTEMPTING TO INSTALL OR USE
THIS PRODUCT. FOLLOW ALL INSTRUCTIONS AND WARNINGS WITH
PRODUCT & VEHICLE OWNERS MANUAL.
LOSS OF VEHICLE CONTROL INVOLVES RISK OF DEATH OR SERIOUS
INJURY, PARTICULARLY TO PARTS OF YOUR BODY NOT RESTRAINED
WITHIN VEHICLE. THIS PRODUCT IS INTENDED FOR WEATHER PROTEC-
TION ONLY AND SHOULD NOT BE RELIED UPON TO CONTAIN OCCUPANTS
IN THE EVENT OF AN ACCIDENT OR TO PROTECT FROM EITHER GROUND
CONTACT OR FALLING OBJECTS.
TO REDUCE RISK OF ACCIDENT OR INJURY:
ALWAYS WEAR SEATBELTS. ALWAYS KEEP HEAD, ARMS & BODY PARTS
WITHIN VEHICLE. FULLY SECURE OR STOW THE SOFT TOP BEFORE
DRIVING ACCORDING TO INSTRUCTIONS. NEVER TRY TO LATCH OR FOLD
SOFT TOP WHILE DRIVING. DO NOT USE IF DAMAGED OR WORN. READ
AND FOLLOW ALL INSTRUCTIONS & WARNINGS ACCOMPANYING THIS
PRODUCT, IN YOUR VEHICLE OWNER'S MANUAL AND OFF ROAD
DRIVING SUPPLEMENT.
RISK OF EYE INJURY! SAFETY GLASSES MUST BE WORN AT ALL TIMES
WHILE INSTALLING OR MAINTAINING THIS PRODUCT.
Advertisement
Related Manuals for Quadratec QuadraTop Adventure Top 1113.00 Series
Summary of Contents for Quadratec QuadraTop Adventure Top 1113.00 Series
- Page 1 QuadraTop ® Adventure ® Installation Manual: for 1997-2006 Wrangler (TJ) Vehicles 11113.00XX TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE: READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS AND PROCEDURE NOTI ES BEFORE ATTEMPTING TO INSTALL OR USE THIS PRODUCT. FOLLOW ALL INSTRUCTIONS AND WARNINGS WITH PRODUCT &...
- Page 2 Careful attention is required to this instruction or operation but does ® generally not relate to personal injury. Damage to your Quadratec product or other property may result if you don’t follow instructions. Important: For a smooth fit and ease...
- Page 3 Adventure Top Assembly for Wrangler TJ: PARTS LIST: REQUIRED TOOLS: A) Windshield Header with Top Deck QTY 1 Safety Glasses B) Passenger Side Door Surround Kit QTY 1 Phillips Head Screwdriver C) Driver Side Door Surround Kit QTY 1 3/32” Drill Bit D) Tailgate Bar with Clips QTY 1 Power Drill...
- Page 4 Step 1: Windshield Header/Over Door Bow Installation FIG2 Put on safety glasses. After removing all quick release knuckles pre-installed on the existing Soft top or hard top hardware, rear of the bow ends and have the set fabric and top, locate the Header/Top screw installed on the other end of the Deck assembly shown in FIG1 and lay the bow.
- Page 5 Step 2: Install Door Surrounds to Vehicle FIG9 FIG1 Locate the (2) Door Surround assemblies Starting on the Drivers side, if you have B & C) and (4) door surround knobs (H6) the rubber seal shown in Fig10 this seal highlighted in FIG9.
- Page 6 Step 3: Installing the Header and Top Deck Assembly to Door Surrounds FIG15 FIG16 Locate the Header and Top Deck assem- front header on the top of the wind- bly completed in step one. With the help shield and the rest of the fabric spread of a friend, place the header/Deck back on the rear of the vehicle (FIG15).
- Page 7 Step 4: Installing the Center Bow to the Door Surrounds FIG21 FIG21A Locate the Center Bow assembly with rear-most bracket hole (FIG21) and slip the pre-installed quick release knuckles the rear bow through the webbing strap on the ends. With the top folded back as loop located on corner of the top deck shown in FIG20, locate the bottom (Fig 21A).
- Page 8 ® Step 5: Installing the Top Deck to the Jeep (continued) FIG26 FIG27 Pull the top down to engage the header and secure the Header to the windshield clamps on each side of the windshield (FIGs 25, 26 & 27). FIG28 FIG29 FIG3...
- Page 9 Step 6: Install the Rear Tailgate Bar Brackets FIG34 FIG35 If the vehicle has previously had a tail- up each hole (from previous Tailgate gate bar bracket (Soft Top Vehicles): brackets) with the existing holes already Place the Tailgate Bar Bracket on the drilled in the tailgate (FIGs 35 &...
- Page 10 Step 7A: Install the Quarter Windows to the Top Deck FIG4 FIG41 FIG42 FIG43 To ensure the top is centered on the This will allow you to line up all win- vehicle you will be installing the two dow zippers and attachments. The rear quarter windows and the rear window corner straps and header will need to be to the top deck and to each other before...
- Page 11 Step 7B: Install Rear Window to the Top Deck FIG44 FIG45 FIG46 FIG47 Locate the rear window and line up and ver’s side rear zipper on the quarter win- slide the rear window into the “C” dow and on the rear window and zip it Channel located at the top of the rear down a few inches (FIG 47).
- Page 12 ® Step 8: Installing the Top to the Jeep Body FIG49 FIG5 Starting at the driver’s side front, right slot by “rolling” the plastic into the slot behind the front seat, attach the front (FIGs 49 & 50). vertical belt rail into the door surround FIG51 FIG52 Once secure move to the rear driver’s...
- Page 13 Step 9: Secure the Over Door Attachments FIG57 FIG58 Locate the two plastic strips sewn to the Starting with the front strips, slip the strips sides of the top above each door (FIG57). into the channel in the door surround FIG59 FIG6 above the door opening (FIGs 58 &...
- Page 14 Step 11: Ensure your Front Header is properly adjusted on the windshield FIG65 FIG66 The Quadratec Adventure Top has been clamped down and the over door bows engineered to the original factory wind- are attached to the bow brackets. If your...
- Page 15 Using Your QuadraTop Adventure Top FIG69 When your installation is complete, you have an attractive, full-function Fastback Style Soft Top with a very streamlined and sporty look. FIG7 Your Adventure Top has been designed with a fold-back Sunroof Feature that provides the ultimate open air driving experience!
- Page 16 Using Your QuadraTop Adventure Top: Folding Back FIG71 FIG72 Your Quadratec Adventure Top has been Unlatch your over door Attachments designed with a fold back “sunroof” fea- from the door Surrounds. (FIG71) ture that gives you the ultimate in open air experience.
- Page 17 Using Your QuadraTop Adventure Top: MAKE SURE THE HOOK AND LOOP FASTENER ARE TIGHTLY SECURED TO THE CENTER BOW AFTER THE FRONT SUN ROOF IS FOLDED BACK. MAKE SURE THAT EACH SIDE WEBBED LOOP IS SECURED AROUND THE CENTER BOW. BOTH REAR CORNER STRAPS MUST ALSO BE SECURE WHEN THE TOP IS FOLDED BACK THESE SAFETY MEASURES ARE DESIGNED TO SECURE THE TOP DECK TO THE VEHICLE AND IF NOT ADHERED TO CAN CAUSE INJURY, DEATH AND A SERIOUS ACCIDENT.
- Page 18 Using Your QuadraTop Adventure Top: Bimini Plus Conversion Please note, easy removal of 3 windows which easily converts back to a weather to create the ultimate Bimini Plus Top, proof complete soft top.
- Page 19 ( 91083.000 available ing condition. If zipper opens behind the at Quadratec.com). slider, the slider may have been spread apart. This problem can usually be fixed Water/Fabric: In the event of seeping...
-
Page 20: Limited Warranty
3 years from date of initial limitation of incidental or consequential retail sale. Quadratec reserves the rights to: (a.) damages, so the limitations and exclusions require invoice or other proof your soft top is herein may not apply to you.