Epilog Laser Legend 6000 Owner's Manual page 83

Owner's Manual for EPILOG Legend Model 6000
100 W ATT AIR COOLED CONFIGURAT ION
The RF driver for the 100 watt is located on the bottom of the machine, in the base pedestal. To service the
RF, first remove the cover. The cover is held in place with phillips head screws. The RF is held in place by
four large phillips head screws. They are located two per side, just inside the handles shown in the drawing.
The unit is can now be pulled partially out of the machine so the electrical connections can be demated.
There are three of them.
Section 15 – Servicing The Legend
December, 2000
hANDLE
hANDLE
PHILLIPS HEAD SCREW S
(COVER)
79