Table of Contents
Advertisement
Owner's Manual for EPILOG Legend Model 6000
18)
Click "Finished".
19)
Close the INTELLIscribe Status Window and INTELLIscribe is installed!
Once INTELLIscribe is installed, you will need to set up your computer to print to the Legend from the
INTELLIscribe Virtual Port instead of your LPT1 port.
20)
Click on the Windows "Start" button.
21)
Select "Settings", and "Printers".
22)
Double click on the Legend print driver icon.
23)
In the "Legend Engraver" window, click on "Printer" and then click on "Properties".
24)
In the "Legend Engraver Properties" window click on the "Details" tab.
The following window appears:
1)
Make sure "INTELLIscribe: (INTELLIscribe Virtual Port)" appears in the "Print to the following
port:" box.
2)
Click on the down arrow to select "INTELLIscribe: (INTELLIscribe Virtual Port)" if it does not
already appear.
Section 9 – Network Printing
December, 2000
47
Advertisement
Table of Contents
