Epilog Laser Legend 6000 Owner's Manual page 41

Owner's Manual for EPILOG Legend Model 6000
CLEAN BEARING
Top
Bottom
CLEAN OPTICS
Lens (other
side)
CLEAN AND LUBE
BEARING
Top
Bottom
To clean the optics use a high-quality cotton swab moistened with the optics cleaner supplied in the accessory
kit. Please read the label on the bottle carefully. Rubbing alcohol should be used only to remove fingerprints.
If you run out of the cleaner supplied by Epilog, acetone can be used as a temporary measure, but should not
be used for regular cleaning as it contains impurities, which can contaminate the optics. If you run out of
solvent, pure ethyl (grain) alcohol such "Golden Grain" and "Everclear" are highly recommended because of
their pure nature and because they are readily available at most liquor stores.
Wet the swab thoroughly with the solvent, and then blot it against a piece of cotton so that it is no longer
soaking-wet. Then daub the optic gently, rotating the swab after each daub to expose clean cotton to the
Section 7 – Engraving Machine Maintenance
December, 2000
LEGEND
CLEANING AND LUBRICATION
Lens
CLEAN OPTICS
Window
CLEAN OPTICS
Mirror
CLEAN AND LUBE
BEARING
Left Side
Right Side
37