Epilog Laser Legend 6000 Owner's Manual page 31

Owner's Manual for EPILOG Legend Model 6000
December, 2000
The arrow keys are used to move through the menu selections up, down, right, or left. The arrow keys are
also used to move the carriage when you are in the "Service", "Move X/Move Y" mode.
CONTRAST
The display is a Liquid Crystal Display (LCD), and for best viewing the contrast may need to be adjusted
lighter or darker. Insert a small, flat blade screwdriver into the slot just below the surface of the keyboard,
and rotate the adjuster to get the best display contrast for your work environment.
POINTER
This is simply a visible reminder that the Laser Diode Pointer (Red Dot Pointer) is turned on. This Laser
Diode Pointer (Red Dot Pointer) is much like the hand held laser pointers, and has a bright red beam. When
this is turned on, DO NOT place your head inside the engraving area, as you may look into the beam. For
additional information, read Section 2 "Safety" contained in this manual.
Section 6 – Using The Epilog Legend 27