Acl - Dahua DH-PFS4212-8GT-96 Web Operation Manual

3) Set ERPS VLAN to be 2. See Figure 3-36.
Click OK.
4)
5) Set port 2 of switch 1 to be RPL owner in RPL Configuration.
Click OK.
Step 7
Step 8 Configure switch 2 and switch 3 in the same way.
View the state in Instance State on the ERPS Configuration interface.
Step 9

3.2.2 ACL

ACL (Access Control List) is for flow identification. For filtering the packet, the network device needs
to configure a series of matching conditions to classify the packets. The conditions can be the source
address, destination address, and the port number of the packet.
When the device port receives the packet, it can analyze the packet field according to the ACL rule of
the current port. And after the specific packet is identified, the packet is allowed or forbidden to pass
according the preset rule.
Figure 3-36 ERPS VLAN configuration
Figure 3-37 Owner port configuration
Figure 3-38 Instance state
33