Dahua DH-PFS4212-8GT-96 Web Operation Manual page 33

3.2.1.1 MEP Configuration
MEP (Maintenance Entity Point) is a part of ERPS.
The layer 2 device added into ERPS are called node. Add no more than 2 ports into an ERPS for each
node.
Step 1 Select Advanced > Seldom-used > ERPS > MEP Setting.
Click Add.
Step 2
Step 3 Configure the parameters.
Parameter
Instance
Residence Port
Level
Tagged VID
Step 4 Click OK.
3.2.1.2 ERPS Configuration
Select Advanced > Seldom-used > ERPS > ERPS Settings.
Step 1
Figure 3-25 MEP configuration
Figure 3-26 Add
Table 3-5 MEP parameters
Description
Enter MEP instance number, such as 1.
Enter the port number that MEP belongs to, such as Port 1.
Maintenance level. It is recommended to set it to be 0.
Enter protocol VLAN, such as VLAN 3.
27