Dahua DH-PFS4212-8GT-96 Web Operation Manual page 66

In PoE Settings, you can view the total power of the 4 ports, and configure available power
Step 2
and overload power.
In Power Status, you can view consumed power, remaining power and reserved power.
Step 3
In Port Status and Control, select the Enable box to enable or disable PoE of the
Step 4
corresponding port.
Click Save.
Step 5
3.2.11.2 Green PoE
Set PoE off and on time.
Step 1 Select Advanced > Seldom-used > PoE> Green PoE.
Set PoE Off Time and PoE On Time.
Step 2
Select the Enable box and click Save.
Step 3
3.2.11.3 Legacy Support
Enable Legacy Support in case of non-standard powered device.
Non-standard powered device means that the device supports 48V PoE power supply, but does not
conform to IEEE 802.3af/at.
Select Advanced > Seldom-used > PoE > Legacy Support.
Step 1
Figure 3-73 Green PoE
60