Aggregation - Dahua DH-PFS4212-8GT-96 Web Operation Manual

Parameter
Ingress Acceptance
Egress Tagging
Allowed VLANs
Step 4 Click Save.

3.1.4 Aggregation

Aggregation is to form the multiple physical ports of the switch into the logical port. The multiple
links in the same group can be regarded as a logical link with the larger bandwidth.
Through aggregation, the ports in the same group can share the communication flow, to make a
larger bandwidth. Besides, the ports in the same group can back up reciprocally and dynamically to
enhance the link reliability.
3.1.4.1 Static Configuration
Step 1 Select Advanced > Common > Aggregation.
Select the aggregation load balancing algorithm mode in Aggregation Configuration.
Step 2
There are four types:
Source MAC Address: The aggregation load balancing algorithm based on MAC

address.
Description
Displays whether data can flow into the port. Only Hybrid supports the
configuration (By default, all date flows into the port under other models).
See the following situations:
Tagged and Untagged: All data flows into the port.

Tagged only: Only tagged data can flows into the port.

Untagged only: Only untagged data can flow into the port.

Displays whether to tag the data that will egress the port. See the following
three situations:
Untag Port VLAN: If the data flow tag is the same with PVID, the tag

will be peeled.
Tag All: All data will be tagged.

Untag All: All data will not be tagged.

Set the allowed VLAN.
Figure 3-10 Aggregation interface
17