Dahua DH-PFS4212-8GT-96 Web Operation Manual page 18

2) Configure the parameters.
Parameter
VLAN
IP address
Mask Length
Click OK.
3)
Step 3 Add the IP route.
Click Add in the Route Setting region.
1)
Parameter
Network
Mask Length
Next Hop
Click OK.
2)
Step 4 Click Save.
3.1.1.3 System time
Set the system time of switch.
Select Advanced > Common > System Config > Current Time.
Table 3-1 VLAN interface
Description
Enter VLAN number.
Set the IP address of the VLAN interface.
Set the mask length of the IP address.
Figure 3-4 Add route
Table 3-2 Description of IP routes
Description
It is the destination of the IP packet.
Mask length, with destination address, is to identify the IP address of the
destination host or the route. After Logical AND between destination
address and network mask, you can get the IP address of the destination
host or the route.
The next hop IP of the route.
12