Local - Dahua DH-PFS4212-8GT-96 Web Operation Manual

Parameter
Link
Flow Control
Speed/Duplex
VLAN
PoE
Receive Usage
Send Usage
Media Type
2.2

Local

You can set the system name, IP address, and subnet mask.
Click Local on the right of Quick setting interface.
Step 1
The Local interface is displayed.
Step 2 Enter the system name, IP address, and mask length.
Step 3 Click OK.
Description
Two link states: Up and Down. Up indicates the port is connected
successfully, and Down indicates the port is not connected or the
connection fails.
Displays the flow control state.
Online: It displays the port rate and the duplex mode.

Offline: It displays Down.

VLAN port. It is VLAN 1 by default.
Displays the power consumption of POE. Only 1–4 ports are PoE ports.
Non-PoE Ethernet switches do not support this function.

The number of PoE ports supported by different models is different.

The current receiving speed is divided by the average speed in a certain
period (5 minutes usually).
The current sending speed is divided by the average speed in a certain
period (5 minutes usually).
Two media types: Copper and Fiber. Copper indicates RJ-45 port, and
Fiber indicates fiber port.
Figure 2-2 Local
3