Dahua DH-PFS4212-8GT-96 Web Operation Manual page 34

Step 2 Click Add.
Step 3 Configure the parameters.
Parameter
ERPS ID
Port 0
Port 1
Port 0 APS MEP
Port 1 APS MEP
Port 0 SF MEP
Port 1 SF MEP
Click OK.
Step 4
Figure 3-27 ERPS configuration
Figure 3-28 Add ERPS
Table 3-6 ERPS parameters
Description
The ID number of ERPS.
The two ports added into the ERPS.
The corresponding protocol packet ERPS to ERPS port. Keep Port 0
APS MEP consistent with Port 0 SF MEP. Keep Port 1 APS MEP
consistent with Port 1 SF MEP. For example: Port 0 APS MEP is 1 and
Port 1 APS MEP is 2.
The corresponding aggregation inspection MEP of ERPS port. Keep
Port 0 APS MEP consistent with Port 0 SF MEP. Keep Port 1 APS MEP
consistent with Port 1 SF MEP. For example: Port 0 SF MEP is 1 and
Port 1 SF MEP is 2.
28