Dahua DH-PFS4212-8GT-96 Web Operation Manual page 36

Figure 3-30
Step 2 Create MEP1 and MEP 2
1) Select Advanced > Seldom-used > ERPS > MEP Setting.
2) Click Add.
3) Set Instance to be 1. See Figure 3-31.
4) Set Residence Port to be 1.
5) Set Level to be 0.
6) Set Tagged VID to be 3, that is protocol VLAN.
Click OK.
7)
Add MEP2 in the same way. Set Instance to be 2, Residence port to be 2, Level to be 0 and
Tagged VID to be 3.
Add port 1 and port 2 into VLAN 1
Figure 3-31 Add MEP
30