2.3
VLAN
Add the port to the VLAN, and configure the VLAN. By default, the port is VLAN1.
Click Vlan on the Quick Setting interface.
Step 1
The Vlan interface is displayed.
Step 2
Configure the port VLAN parameters.
Parameter
Port
Mode
Port VLAN
Allowed VLANs
Step 3
Click OK.
Figure 2-3
VLAN
Table 2-2 Port VLAN configuration parameter
Description
Displays all ports of the switch.
Three modes: Access, Hybrid, and Trunk.
Access: When the port connects to terminal devices (such as PC and IPC),
select Access.
Trunk: When the port connects to switch, select Trunk.
Hybrid: Not often used.
Add the port to a VLAN. By default, the port belongs to VLAN1, and the range is
1–4094.
Set the allowed VLAN. When the mode is Trunk, you can set it.
4