Vlan Configuration - Dahua DH-PFS4212-8GT-96 Web Operation Manual

Parameter
Egress Limit Enable
Egress Limit (kbps)
Receive Usage
Send Usage
Step 2 Click Save.

3.1.3 VLAN Configuration

Add the port to the VLAN, and configure the VLAN. By default, the port belongs to VLAN1.
Select Advanced > Common > VLAN Settings.
Step 1
The VLAN Settings interface is displayed.
Step 2 Enter 1, 2 in VLANs to create VLAN 1 and VLAN 2.
Step 3 Configure the port VLAN parameters.
Parameter
Port
Mode
Port VLAN
Description
Enable/Disable egress limit.
: Egress enable is enabled.

: Egress enable is disabled.

Set the egress limit.
Displays the acceptance usage.
Displays the send usage.
Figure 3-9 VLAN settings
Table 3-4 Port VLAN configuration parameter
Description
Displays all ports of the switch.
Three modes: Access, Hybrid, and Trunk.
Add the port to a VLAN. By default, the port belongs to VLAN1. The range is
1–4094.
16