Table of Contents
Advertisement
Fastening
m
m
P_MOZ_0015_SW
Fig. 10
Dosing rate too low
Vibrations can disrupt the liquid end valves.
–
DN
1.
Take the dimensions (m) for the fastening holes from the appro‐
priate dimensions- or data sheets.
2.
Fix the pump base to the supporting floor with sufficient strong
screws.
With externally mounted pumps fix the frame to the supporting floor
with sufficient strong screws.
Secure the metering pump so that no vibrations can
occur.
Assembly
21
Advertisement
Table of Contents
