Oracle Acme Packet 4600 Hardware Installation And Maintenance Manual page 64

show health and press <Enter> on each system as shown in the
following.
Confirm that current configurations of both the active and standby Acme Packet
2.
4600 match by typing display-current-cfg-version and press <Enter> at the ACLI
prompt.
NETNETSBC1# display-current-cfg-version
Current configuration version is 5
NETNETSBC1#
NETNETSBC2# display-current-cfg-version
Current configuration version is 5
NETNETSBC2#
Note:
While the two current configuration version numbers on the two systems
do not need to match each other, they MUST match the shared running
configuration version.
Chapter 6
Standby State for HA Nodes
6-5