Features - ST STM32U5 User Manual

1

Features

• STM32U5 Series
• Internal SMPS to generate V
• USB Type-C
• 3 user LEDs
• RESET and USER push-buttons
• 32.768 kHz crystal oscillator
• Board connectors:
– USB Type-C
– ST Zio connector including ARDUINO
– ST morpho extension pin headers for full access to all STM32 I/Os
• Flexible power-supply options: ST-LINK, USB V
• On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
1. SMPS significantly reduces power consumption in Run mode, by generating V
converter.
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2861 - Rev 2
®
microcontroller (Arm
logic supply, identified by '-Q' suffixed boards
core
®
sink device FS
®
connector
®
, MDK-ARM, and STM32CubeIDE
®
Cortex -M33 at 160 MHz) in LQFP144 package
®
Uno V3
, or external sources
BUS
core
UM2861
(1)
STM32CubeU5 MCU Package
logic supply from an internal DC/DC
Features
page 2/49