Features - ST STM32F334C8 User Manual

Features

1 Features
•
STM32F334C8T6 Arm
of flash memory and 16 Kbytes of RAM in an LQFP48 package
•
One buck-boost converter
•
High-brightness LED dimming with a buck converter
•
Four user LEDs
•
User and reset push-buttons
•
Board connectors:
–
–
–
•
Flexible power-supply options: ST-LINK USB V
•
External application power supply: 3 and 5 V
•
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability:
mass storage, Virtual COM port, and debug port
• Comprehensive free software libraries and examples available with the STM32CubeF3
MCU Package
•
Support of a wide choice of Integrated Development Environments (IDEs) including
IAR Embedded Workbench
a. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
6/34
®(a)
Two 2-pin headers for buck-boost converter I/O voltages
Serial Wire Debug (SWD) 6-pin header
Extension header to MCU I/Os for a quick connection to the prototyping board and
easy probing
®
Cortex -M4 core-based microcontroller featuring 64 Kbytes
BUS
®
, MDK-ARM, and STM32CubeIDE
UM1735 Rev 3
or external sources
UM1735