Features - ST STM32 User Manual

1

Features

• STM32C071RBT6
memory and 24 Kbytes of SRAM, in an LQFP64 package
• Two user LEDs shared with ARDUINO
• User and reset push-buttons
• User USB Device FS
• 32.768 kHz crystal oscillator
• Board connectors:
– ARDUINO
– ST morpho extension pin headers for full access to all STM32C0 I/Os
– USB Type-C
– USB Type-C
– MIPI
footprint)
• Flexible power-supply options: ST-LINK USB V
• On-board STLINK-V2EC debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM3353 - Rev 1
microcontroller based on the Arm
®
®
Uno V3 expansion connector
®
connector for ST-LINK
®
user connector
® ®
debug connector (Arm Cortex
®
, MDK-ARM, and STM32CubeIDE
® ®
Cortex -M0+ processor with 128 Kbytes of flash
Uno V3 and ST morpho
®
10‑pin 1.27 mm‑pitch debug connector over STDC14/MIPI10
, user USB FS connector, or external sources
BUS
UM3353
Features
STM32CubeC0 MCU Package
page 2/31