SA 07.2
SA 16.2/SAR 07.2
AC 01.2 Intrusive Modbus RTU
5.3.1.
Overview of output drive types
Table 10: Overview on output drive types
Valve attachment
Application
A
for rising, non-rotating valve stem
capable of withstanding thrust
not appropriate for radial forces
B, B1
B4
for rotating, non-rising valve stem
C
not capable of withstanding thrust
D
E
5.3.2.
Output drive type A
Short description
SAR 16.2 Control unit - electromechanical
Description
➭
➭
and E
Figure 11: Output drive type A
[1]
Output mounting flange
[2]
Stem nut
[3]
Valve stem
Output drive type A consisting of output mounting flange [1] with axial bearing stem
nut [2]. The stem nut transmits the torque from the actuator hollow shaft to the valve
stem [3]. Output drive type A can withstand thrusts.
To adapt the actuators to available output drive types A with flanges F10 and F14
(year of manufacture 2009 and earlier), an adapter is required. The adapter can be
ordered from AUMA.
page 17, Output drive type A
page 21, Output drive types B/C/D
Assembly
Assembly
➭
page 18, Multi-turn actuator with
output drive type A: mount
➭
page 22, Multi-turn actuator with
output drive type B: mount
17