Product Description; Product Design - E+E Elektronik EE310 Operation Manual

2

Product Description

The UL certified EE310 is optimized for reliable indoor and outdoor measurement in demanding
industrial applications. In addition to highly accurate measurement of relative humidity (RH) and
temperature (T), the transmitter also calculates parameters such as dew point, absolute humidity
and mixing ratio.
Various models are available including wall, surface, duct and remote probe. The remote probe can
be used up to 180 °C (356 °F) and the pressure tight probe up to 20 bar (290 psi). The design of the
enclosure facilitates easy mounting and maintenance.
The measured values are available on two analogue outputs and the Modbus digital interface.
The state of the art TFT colour display shows up to four measurands simultaneously and offers exten-
sive error diagnostics. The integrated data logging function saves all measured and calculated values
to the internal memory. The data can be displayed as graph directly on the device or easily downloaded
via USB interface.
The E+E proprietary coating protects the sensor elements against corrosive and electrically conductive
pollution.
The outputs can be freely configured and an adjustment performed directly via display or with the free
EE-PCS software using the USB service interface.
2.1

Product design

Fig. 1 Product design
Upper enclosure part with electronic / display* and probe cable
1
3.5" TFT colour display*
2
5 push-buttons for configuration menu
3
4 Bottom part with electrical connection, alarm* + supply module* and mounting holes
5 Micro USB service interface
Standard cable glands / connectors*
6
Additional cable gland / connector*
7
Probe / cable gland / connector*
8
* optional
Operating instructions for EE310 Humidity / Temperature Transmitter
EE310-T5/T8/T10
1
2
3
4
5
6
7
8
EE310-T1
1
4
5
6
7
8
5