E+E Elektronik EE310 Operation Manual page 31

Menu
Data-logging
Sampling rate
Axis 1
Axis 2
Delete saved values
Axis 1 value
(cursor position)
Axis 1
Date
(cursor position)
Fig. 32 Data logging
Each point in the graph represents a logged value. The points are connected by a linear
interpolation.
One point
The data logging continues even when the data memory is full; new data is stored while the oldest data
is deleted (first in first out memory). The last 20.000 logged values are available in the internal memory.
The logged data can be downloaded with EE-PCS Product Configuration Software as .csv file by
choosing the measurands and the time period.
Operating instructions for EE310 Humidity / Temperature Transmitter
OFF
1 s / 10 s
1 min / 5 min / 15 min / 30 min
1 h / 5 h / 12 h
Measurand
Scale minimum value
Scale maximum value
Measurand
Scale minimum value
Scale maximum value
Axis 2 value
(cursor position)
4 Cursor
Axis 2
Time
(cursor position)
OFF
Temperature [°C]
Temperature [°F]
Temperature [K]
Rel. humidity [%]
Vap. p. pressure [mbar]
Vap. p. pressure [psi]
Dew point [°C]
Dew point [°F]
Wet bulb temp. [°C]
Wet bulb temp. [°F]
Abs. humidity [g/m³]
Abs. humidity [gr/ft³]
Mixing ratio [g/kg]
Mixing ratio [gr/lb]
Enthalpy [kJ/kg]
Enthalpy [ft lbf/lb]
Enthalpy [BTU/lb]
Frost point [°C]
Frost point [°F]
Water activity [aw]
Saturation [%]
Water content [ppm]
Wet bulb temp. [K]
Dew point [K]
Frost point [K]
Volume concentr. [ppm]
1 Home button
2 Configuration incl. data logger menu
3 Time scale for the graph (5 min - 3 months)
31