General; Symbol Assertion; General Safety Instructions; Product Description - E+E Elektronik EE22 Series Manual

1.

GENERAL

The manual is a part of the scope of supply and serves to ensure proper handling and
optimum functioning of the instrument.
®
E+E Elektronik Ges.m.b.H. doesn't accept warranty and liability claims neither upon this
publication nor in case of improper treatment of the described products.
For this reason, the manual must be read before start-up.
In addition, the manual is for all personnel who require knowledge concerning transport,
setup, operation, maintenance and repair.
The manual must not be used for the purpose of competition without a written consent
®
from E+E Elektronik and must also not be forwarded to third parties.
Copies for personal use are permitted.
The document may contain technical inaccuracies and typographical errors. The content
will be revised on a regular basis. These changes will be implemented in later versions.
The described products can be improved and changed at any time without prior notice.
© Copyright E+E Elektronik
1.1

Symbol assertion

This symbol indicates a safety instruction.
These safety instructions should always be followed carefully.
By not following these instructions injuries of persons or material damage could happen.
Therefore E+E Elektronik ® does not accept liability.
This symbol indicates a note.
These notes should be observed to achieve optimum functioning of the equipment.
1.2

General Safety Instructions

•
Excessive mechanical loads and incorrect usage should always be avoided.
•
Take care when unscrewing the filter cap as the sensor element could be damaged.
•
The sensor is an Electro Static Discharge sensitive component (ESD). When
touching the sensor element, ESD protective measures should be followed.
•
Installation, electrical connection, maintenance and commissioning should be
performed by qualified personnel only.
2.

PRODUCT DESCRIPTION

Specific for the EE22 series are the interchangeable sensing probes with connector.
The EE22 series also stands for multifunctionality, highest accuracy, easy mounting
and service.
Following models are available:
•
Model A for wall mounting
•
Model F for wall mounting with rear cable outlet.
Due to its versatility e.g. probe cable for remote sensing probe, display, etc. the
transmitter can be utilised in many different applications.
The construction of the transmitter makes field and local loop calibration an easy task.
®
Ges.m.b.H.
12
All rights reserved.