Probe Mounting; T1: Wall Or Surface Mounting; T2: Duct Mounting - E+E Elektronik EE310 Operation Manual

Model
EE310
Model
EE310
3.3

Probe mounting

3.3.1

T1: Wall or surface mounting

EE310-T1 are wall or surface mount transmitters.
For mounting template of enclosure see chapter 3.1 Mechanical installation /
Fig. 4 Dimensions and mounting template of polycarbonate enclosure in mm (inch).
T working range:
The transmitter shall be mounted with the probe pointing downwards!
Fig. 14 Mounting of model EE310-T1
3.3.2

T2: Duct mounting

EE310-T2 are duct mount transmitters.
For mounting template of enclosure see chapter 3.1 Mechanical installation /
Fig. 4 Dimensions and mounting template of polycarbonate enclosure in mm (inch).
T working range probe:
Operating instructions for EE310 Humidity / Temperature Transmitter
Type
Out 1
Out 2
Type
Modbus RTU
-40...+60 °C
(-40...140 °F)
-20...+50 °C
(-4...122 °F)
-40...+80 °C
electronics -40...+60 °C
-20...+50 °C
Outputs
Ratings
0-1V
0-5V
0-10V
0-20mA
4-20mA
(SELV Limited Energy source)
0-1V
0-5V
0-10V
0-20mA
4-20mA
(SELV Limited Energy source)
Ratings
0-5V
(SELV Limited Energy source)
(with display)
(-40...176 °F)
(-40...140 °F)
(with display)
(-4...122 °F)
Terminals
Out 1 (4) –
GND (3)
Out 2 (5) –
GND (3)
Terminals
RS485 A (=D+) (7) –
RS485 B (=D-) (8) –
GND RS485 (6)
19