E+E Elektronik EE310 Operation Manual page 26

ON
Power
OFF
% / RH
Switching point
Hysteresis
open
Terminal 2-3
closed
open
Terminal 5-6
closed
Fig. 26 Example of alarm in case of power supply failure using inverted alarm outputs.
The measurands at the outputs as well as switching points, hysteresis and the default state (standard
/ inverted) can be set via EE-PCS Product Configuration Software or using the display and the push
buttons.
Menu
Alarm output*
Alarm number
Mode
* Menu only available with connected alarm module during EE310 start-up
26
t
Standard
Inverted
Alarm 1
Alarm 2
Measurand
Switch hysteresis
Switching point
Normal state
Measurand
Switching point
low
Switch window
Switching point
high
Normal state
Error indication Normal state
Switching point
OFF
Temperature [°C]
Hysteresis
Temperature [°F]
Temperature [K]
Rel. humidity [%]
Standard
Vap. p. pressure [mbar]
Vap. p. pressure [psi]
Dew point [°C]
Dew point [°F]
Inverted
Wet bulb temp. [°C]
Wet bulb temp. [°F]
Abs. humidity [g/m³]
Abs. humidity [gr/ft³]
Mixing ratio [g/kg]
Mixing ratio [gr/lb]
Switching point
Enthalpy [kJ/kg]
Enthalpy [ft lbf/lb]
Enthalpy [BTU/lb]
Hysteresis
Frost point [°C]
Frost point [°F]
Water activity [aw]
Saturation [%]
Switching point
Water content [ppm]
Wet bulb temp. [K]
Dew point [K]
Hysteresis
Frost point [K]
Volume concentr. [ppm]
Standard
Inverted
Standard
Inverted
Operating instructions for EE310 Humidity / Temperature Transmitter